Device Details
Overview
| Name | Version: | ParamLatch 1.7.3 |
| Author: | warf |
| Device Type: | MIDI Effect |
| Description: | MIDI Auto-Mapping to Selected Parameter - Control the parameter you select - Supports both standard knobs (Pots) and encoders (Endless) - Minimal device width to save screen space setup: - Connect your MIDI device to Live with the right cable. - Go to Live’s Settings and enable the MIDI input port for your device (make sure Track is turned on for that port). - Open the I/O section. - On a MIDI track, select your device in the MIDI From dropdown. - Set the track monitor to In so it always receives incoming MIDI. Then press the Learn button in ParamLatch and move a knob on your MIDI controller up and down widely for about 3 seconds. |
Details
| Live Version Used: | 12.0.5 |
| Max Version Used: | 8.6.2 |
| Date Added: | Jan 29 2026 10:20:11 |
| Date Last Updated: | Jan 29 2026 20:22:55 |
| Downloads: | 0 |
| Website: | https://ko-fi.com/s/248aff5e38 |
| ⓘ License: | None |
Average Rating
Log in to rate this device |
-n/a- |
Comments
Hello. I like the ideaof useful clean , and small devices for specific task, so I am interested in your collection and I thank yo for making available. Parameter latch is not working for me in windows 11 Ableton 12.3. I have another one wich I use and it is working well . Yours when I useing the Learn function it doesnt do anything. The rest of your m4l pack is working as expected till now.
Posted on January 29 2026 by eRKa |
Report Issue
@eRKa
Sorry, I don’t have a proper manual ready yet 🙏
Could you try this setup:
- Connect your MIDI device to Live with the right cable.
- Go to Live’s Settings and enable the MIDI input port for your device (make sure Track is turned on for that port).
- Open the I/O section.
- On a MIDI track, select your device in the MIDI From dropdown.
- Set the track monitor to In so it always receives incoming MIDI.
Then press the Learn button in ParamLatch and move a knob on your MIDI controller up and down widely for about 3 seconds.
Sorry, I don’t have a proper manual ready yet 🙏
Could you try this setup:
- Connect your MIDI device to Live with the right cable.
- Go to Live’s Settings and enable the MIDI input port for your device (make sure Track is turned on for that port).
- Open the I/O section.
- On a MIDI track, select your device in the MIDI From dropdown.
- Set the track monitor to In so it always receives incoming MIDI.
Then press the Learn button in ParamLatch and move a knob on your MIDI controller up and down widely for about 3 seconds.
Posted on January 29 2026 by warf |
Report Issue
Login to comment on this device.
Browse the full library