Device Details
Overview
| Name | Version: | Parallel Step Counter 1.0 |
| Author: | Andromeda |
| Device Type: | MIDI Effect |
| Description: | Name: Parallel Step Counter. Format n System: Max For Live Device / MIDI Effect / Max 9.1.0 or Higher. Author: Andromeda. Profile: A parallel sequencer without too many pitch variations, which means that there is not much freedom in pitch controling. Explicate: ·Sidebar: To control basic parameters. 1.”Sync/Allo”: switch between “sync to your DAW” and “manually change the speed with the slider below”. 2.”Step[ms]”: manually change the global speed in milliseconds when “Allo” is selected. ·Mainview: There are 2 sequencer groups, a purple one and an orange one, as you can see. They have completely equivalent parameters, so we only look at the purple side. 1.”1 Shift”: It’s used to select witch independent sequencer on the left group you want to use. Actually, each panel on the left is an independent sequencer. For example, selecting “4” with “1 shift” corresponds to activating the panel of the corresponding length in the left. In addition, each sequencer group has a maximum of ten steps to use. 2.The Sliders: set the step size for each independent sequencer. 3.”Affix on”: When the value is “1”, an additional MIDI signal will be sent after each loop ends. 4.”Note[Main]”: set the desired pitch. 5.”Note[Aff]”: When the value of “Affix on” is “1”, you can change the pitch of the additional signal with this widget. 6.”Gate”: note length. |
Details
| Live Version Used: | 12.3.2 |
| Max Version Used: | 9.1.0 |
| Date Added: | Jan 10 2026 18:03:00 |
| Date Last Updated: | Jan 10 2026 18:04:02 |
| Downloads: | 34 |
| ⓘ License: | None |
Average Rating
Log in to rate this device |
-n/a- |
Files
| Device File: | Parallel Step Counter_by Andromeda.amxd |
Login to comment on this device.
Browse the full library